Make video from an image

Settle the still first, then describe the motion and camera to generate your first shot.

On this page

For your first video, settle on a still image before animating it. That way you check the subject, composition and branding before paying for motion.

#Make an image move

“Animate” first asks “How should it move?”: the first four options start generating as soon as you click, with the estimated credits beside them; “Describe it myself” lets you adjust the settings first.
  1. Select a finished image and click “Animate”, then “Describe it myself”; or choose “Video” from the “+” beside the card. Either way the video input box opens.
  2. Check that the original is attached as the start frame or a reference, and choose a video model that supports that input.
  3. Choose the aspect ratio, length, resolution and any audio options. Keep the start frame close to the target aspect ratio.
  4. Describe how the subject moves, how the camera moves and what must stay steady.
  5. Check the references, settings and estimated credits, then send. Watch the whole result once and make sure the action and camera don’t jump.
Try this prompt
Keep the cup, ice, coffee layers and table position from the reference unchanged. The camera slowly pushes in, fine condensation beads on the glass, plant shadows in the background sway gently. Realistic commercial photography, restrained motion; no warping of the cup, no new objects, no sudden cuts.

“Animate” first asks “How should it move?”. Choosing “Subtle life”, “Push in”, “Orbit showcase” or “Character action” starts generating right away, and the number beside each is its estimated credits. To change the aspect ratio, length or prompt first, choose “Describe it myself”, adjust them in the input box, then send. “Effect templates…” sits at the bottom.

Above the video input you can set the “Start frame” and “End frame” (“Swap first and last frames” sits between them), turn on “Loop” so the ending returns to the start, or use “Direction” for shot direction. Below, use “Choose video model” and “Video settings” (resolution, length and so on), then check the number of outputs and the estimated credits before sending.

#Choose an input method

Start and end frames sit above the video input, with the video model and settings below; the selected video card shows the video toolbar.
You can also switch the home creation type to “Video” to generate straight onto a canvas.
MethodGood forCheck
Text to videoNo starting image yetAre the subject, action and setting specific enough?
Start frame, or start and end framesYou know where the shot starts or endsDoes the model support it? Does the aspect ratio match?
Image, video or audio referencesMatching a person, motion, rhythm or styleWhich types, how many and what sizes the model accepts

Whether reference media and start/end frames can be combined depends on the model. If you see a compatibility warning, remove the conflicting input or switch models as the interface suggests; don’t pack every material into one turn. References of real people may face extra limits or review.

#Test first, then render the final

When using shot direction or effect templates, pick a direction first, then review the prompt it fills in. Template previews illustrate the motion; the final result comes from the model. On models that support it, turn on “Draft mode” to test with a 480p draft; if you like it, you can make the 1080p final from the card within 7 days. The two steps are charged separately.

Where video editing is supported, you can mark an area and describe the change. It creates a new result; check both the change inside the area and the stability of the subject outside it over time.

Keep exploringBack to top ↑
Help center